Learn how to protect drinking water on your property through our Cross Connection Control Program.

Learn more about the new Backflow Preventer Testing Portal

A cross connection is when our clean drinking water system connects to non-potable substances. For example, a garden hose submerged into a soapy bucket or a fire sprinkler system directly connected to a drinking water line.

Cross connections may lead to serious health risks.

They create a path for contaminants to flow backwards into the drinking water supply under low-pressure conditions. This is called backflow. To avoid backflow, install backflow preventer devices at applicable connection points.

Cross Connection Control Program

Our Cross Connection Control program maintains drinking water quality in our water distribution system. The program includes:

  • enforcement of annual testing of existing backflow preventers
  • installation of backflow preventers for all new or redeveloped properties in the City

This all supports the City’s Cross Connection Control Bylaw.

Cross Connection Control Standards and Specifications

We provide technical guidance in selection, installation, and testing requirements for backflow preventers.

How to Reduce Backflow Risk

  • Hire a plumbing contractor to select and install required backflow preventers.
  • Hire a certified tester to test and inspect backflow preventers every year. Submit the test report to the City.

  • If a backflow preventer fails a test or is leaking: have it inspected, repaired or replaced as soon as possible.
  • If a backflow preventer and the hazard it isolates is removed: send a removal form to the City.

Backflow Preventer Testing

All testable backflow preventers need regular testing to ensure they are working correctly. To test a backflow preventer, hire a certified tester who:

Test backflow preventers:

  • when installed
  • every year afterwards
  • after a device is repaired, relocated, replaced
  • if any other alterations are made to the device

You must submit the test report to the City of Surrey after each backflow preventer test and inspection.

Backflow Preventer Forms and Procedures

New or Unregistered Backflow Preventers

The tester must submit the test report within 14 days of the date of the test to cccreports@surrey.ca.

  • Submissions must be legible and signed
  • You need a plumbing permit for all new or previously unregistered backflow preventers.
  • All fees, including test report fees, are due at the time of your permit application.
  • You can also submit a paper copy to Engineering Department – Water Section 13450 104 Avenue Surrey, BC V3T 1V8

The test report form now includes a space for a plumbing permit number.  We will only accept reports with a valid permit number.

Existing Backflow Preventers

Testers


Customers

Replacing a Backflow Preventer

If you replace any part of an existing backflow preventer, test the new/replacement device must immediately.

Submit the test replacement through the Backflow Preventer Testing Portal. Include information about the device being replaced.

Removing a Backflow Preventer

Complete A Backflow Preventer Removal Form and send it to cccreports@surrey.ca. This confirms that the backflow preventer, and the hazards it isolates, have been removed. 

You must also include photos showing the previous location of the backflow preventer and hazard.

After we receive your forms, we will deactivate the backflow preventer. We won't issue further notice for testing of the device.

Contact

For more information on cross connections and backflow, contact Engineering at cccinfo@surrey.ca.